Crane Service Company
Crane Type : MacGreggor GLB3528 22828gr
Location : Salira Port – Cilegon
Job Order : On Site – General Inspection Crane
In preparation for docking activities, the ship should carry out an inspection first to determine what parts must be done during docking
Seacrane Asia Service Team contacted for crane inspection job. To determine whether the crane needs repairs or not during docking.
Crane Type : SCM YQHG 3150 80T – 13M / 5T – 47M
Location : PHE / OSES / South East Sumatera
Job Order : On Site – Trouble Shooting Luffing System
Above Java Sea, an AWB Crane suddenly trouble when operated. Causing operational disturb and delay job process.
Seacrane Asia Service Team contacted for unexpected trouble crane on vessel. Crane cannot lifting its maximum capacity.
After remote assist was carried out and the problem was unsolved, the Seacrane Asia team was sent to the location.
Crane Type : Tsuji
Location : Bunati / Tanah Bumbu / South Kalimantan
Job Order : On Site – Trouble Shooting Crane
When Vessel must operated normally but unexpected trouble happens, its difficult time for everyone to face
Seacrane Asia Service Team contacted for unexpected trouble crane on vessel, there were Crane 1 slewing itself when hoist up and Crane 4 intermittent stop. With limited time due to cargo loading activities, remote assist actions was difficult choice and need to go on board as soon as possible.
With the spirit of independence, Seacrane Asia Service Team then deploying to vessel.
Crane Type : MacGregor K5036-4HD-CC3000
Location : Kaliorang / Kutai Timur / Indonesia
Job Order : On Site – Trouble Shooting Luffing System
During loading cargo operation, suddenly luffing boom crane wont operate, many error message showing up either on monitor and MC card, jib cannot parking in boom rest and its dangerous position for crane.
The Seacrane Asia Service Team was then contacted, after remote assist was carried out and the work was unsuccessful, the Seacrane Asia team was sent to the location.
After securing jib on boom rest, then Seacrane Asia Service Team carrying out several actions and found that the luffing hydraulic motor oil had an internal leak and had to be replaced immediately.
Unfortunately, spare parts are not available on board.
After providing a short course in installing motor luffing oil, Seacrane Asia Service Team left the job site.
Crane Type : IHI
Location : Surabaya / Indonesia
Job Order : Jetty – Replacement Slewing Bearing Crane
Slewing bearing is critical part at crane. When its damaged, crane will not able to operated.
To replaced it, its need specified time and location. Also need experienced engginer to execute.
Seacrane Asia Service Team was contacted for Supervised Replacement Slewing Bearing 2 cranes for only 1 night (without flattness)
After time and location fixed, Experienced Engineer Seacrane Asia Service Team deploying to location
Crane Type : MacGregor, K5028-4HD
Location : Muara Berau / Samarinda / Indonesia
Job Order : On Site – Installing Gearbox Holding
Gearbox Holding was damaged and previously SeaCrane Asia Service team was deployed and succesfully dismantling holding Gearbox.
After incoming new gearbox, SeaCrane Asia Service team deploying to installing gearbox holding
After succesfully installing gearbox, SeaCrane Asia Service team found that hoisting winch wont operated normally.
SeaCrane Asia Service experience Engineer then performing Trouble shooting and found that Hydraulic Oil motor was over leakaged and need to be Replaced.
After replacing Hydraulic Oil Motor, Crane able to operating Normally and ready to Cargo Operation.
Crane Type : MacGregor, K5028-4HD
Location : Muara Berau / Samarinda / Indonesia
Job Order : On Site – Dismantling Gearbox Holding
During normal cargo operation, suddenly crane stop working and error 58 appear on MacGreggor control card.
Seacrane Asia Service Team was then contacted, and after remote assist trouble shooting, problem found from Damaged Gearbox Hoisting.
Seacrane Asia Service Team then deploying to Dissambly Gearbox Holding on site.
Crane Type : Kawasaki
Location : Sailing Cilegon – Muara Jawa
Job Order : On Site – Replacement Hoisting Staffa Motor
During loading cargo activities, crane reported noise coming when hoist operation. After remote assist, the noise was thought to come from the hoisting motor
Seacrane Asia Service Team then sent on board for Replacing Staffa Motor Hoisting.
